Bits › 1/8" O-flute bit › mdf
1/8" O-flute bit: mdf
Other materials: acrylic · aluminum · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · melamine · softwood
Same material, other bits: all mdf settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools OFS-18U-DLC | hobby-ultralight | 12000 | 24.2 | 0.00202 | source |
| High Country Tools OFL-18U-DLC | hobby-ultralight | 12000 | 24.2 | 0.00202 | source |
| High Country Tools OFS-18U-DLC | hobby-light | 17000 | 53.4 | 0.00314 | source |
| High Country Tools OFL-18U-DLC | hobby-light | 17000 | 53.4 | 0.00314 | source |
| High Country Tools OFS-18U-DLC | hobby-rigid | 17000 | 76.2 | 0.00448 | source |
| High Country Tools OFL-18U-DLC | hobby-rigid | 17000 | 76.2 | 0.00448 | source |
| High Country Tools OFS-18U-DLC | business | 17000 | 106.7 | 0.00628 | source |
| High Country Tools OFL-18U-DLC | business | 17000 | 106.7 | 0.00628 | source |
| High Country Tools OFS-18U-DLC | industrial | 17000 | 129.6 | 0.00762 | source |
| High Country Tools OFL-18U-DLC | industrial | 17000 | 129.6 | 0.00762 | source |
| SpeTool O-flute | any | 18000 | 108 | 0.006 | source |
FAQ
What feeds and speeds for a 1/8" O-flute bit in mdf on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00202 in per tooth and a feed of 24.2 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in mdf on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00314 in per tooth and a feed of 53.4 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in mdf on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00448 in per tooth and a feed of 76.2 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in mdf on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00628 in per tooth and a feed of 106.7 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in mdf on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00762 in per tooth and a feed of 129.6 IPM (2 sourced rows). Start low and test in scrap.