Bits › 1/8" O-flute bit › hdpe / uhmw
1/8" O-flute bit: hdpe / uhmw
Other materials: acrylic · aluminum · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · mdf · melamine · softwood
Same material, other bits: all hdpe / uhmw settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools OFS-18U-DLC | hobby-ultralight | 11500 | 29.5 | 0.00257 | source |
| High Country Tools OFL-18U-DLC | hobby-ultralight | 11500 | 29.5 | 0.00257 | source |
| High Country Tools OFS-18U-DLC | hobby-light | 11500 | 45.9 | 0.00399 | source |
| High Country Tools OFL-18U-DLC | hobby-light | 11500 | 45.9 | 0.00399 | source |
| High Country Tools OFS-18U-DLC | hobby-rigid | 11500 | 65.6 | 0.00571 | source |
| High Country Tools OFL-18U-DLC | hobby-rigid | 11500 | 65.6 | 0.00571 | source |
| High Country Tools OFS-18U-DLC | business | 11500 | 91.9 | 0.00799 | source |
| High Country Tools OFL-18U-DLC | business | 11500 | 91.9 | 0.00799 | source |
| High Country Tools OFS-18U-DLC | industrial | 11500 | 111.6 | 0.0097 | source |
| High Country Tools OFL-18U-DLC | industrial | 11500 | 111.6 | 0.0097 | source |
FAQ
What feeds and speeds for a 1/8" O-flute bit in hdpe / uhmw on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00257 in per tooth and a feed of 29.5 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in hdpe / uhmw on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00399 in per tooth and a feed of 45.9 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in hdpe / uhmw on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00571 in per tooth and a feed of 65.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in hdpe / uhmw on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00799 in per tooth and a feed of 91.9 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in hdpe / uhmw on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0097 in per tooth and a feed of 111.6 IPM (2 sourced rows). Start low and test in scrap.