Bits › 1/8" O-flute bit › epoxy resin
1/8" O-flute bit: epoxy resin
Other materials: acrylic · aluminum · baltic birch plywood · dense hardwood (maple, oak) · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all epoxy resin settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools OFS-18U-DLC | hobby-ultralight | 12000 | 17.6 | 0.00147 | source |
| High Country Tools OFL-18U-DLC | hobby-ultralight | 12000 | 17.6 | 0.00147 | source |
| High Country Tools OFS-18U-DLC | hobby-light | 14500 | 33.1 | 0.00228 | source |
| High Country Tools OFL-18U-DLC | hobby-light | 14500 | 33.1 | 0.00228 | source |
| High Country Tools OFS-18U-DLC | hobby-rigid | 14500 | 47.3 | 0.00326 | source |
| High Country Tools OFL-18U-DLC | hobby-rigid | 14500 | 47.3 | 0.00326 | source |
| High Country Tools OFS-18U-DLC | business | 14500 | 66.2 | 0.00457 | source |
| High Country Tools OFL-18U-DLC | business | 14500 | 66.2 | 0.00457 | source |
| High Country Tools OFS-18U-DLC | industrial | 14500 | 80.4 | 0.00554 | source |
| High Country Tools OFL-18U-DLC | industrial | 14500 | 80.4 | 0.00554 | source |
FAQ
What feeds and speeds for a 1/8" O-flute bit in epoxy resin on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00147 in per tooth and a feed of 17.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in epoxy resin on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00228 in per tooth and a feed of 33.1 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in epoxy resin on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00326 in per tooth and a feed of 47.3 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in epoxy resin on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00457 in per tooth and a feed of 66.2 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in epoxy resin on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00554 in per tooth and a feed of 80.4 IPM (2 sourced rows). Start low and test in scrap.