Bits › 1/8" O-flute bit › hardwood
1/8" O-flute bit: hardwood
Other materials: acrylic · aluminum · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all hardwood settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools OFS-18U-DLC | hobby-ultralight | 12000 | 22 | 0.00183 | source |
| High Country Tools OFL-18U-DLC | hobby-ultralight | 12000 | 22 | 0.00183 | source |
| High Country Tools OFS-18U-DLC | hobby-light | 18000 | 51.4 | 0.00285 | source |
| High Country Tools OFL-18U-DLC | hobby-light | 18000 | 51.4 | 0.00285 | source |
| High Country Tools OFS-18U-DLC | hobby-rigid | 18000 | 73.4 | 0.00408 | source |
| High Country Tools OFL-18U-DLC | hobby-rigid | 18000 | 73.4 | 0.00408 | source |
| High Country Tools OFS-18U-DLC | business | 18000 | 102.7 | 0.00571 | source |
| High Country Tools OFL-18U-DLC | business | 18000 | 102.7 | 0.00571 | source |
| High Country Tools OFS-18U-DLC | industrial | 18000 | 124.7 | 0.00693 | source |
| High Country Tools OFL-18U-DLC | industrial | 18000 | 124.7 | 0.00693 | source |
FAQ
What feeds and speeds for a 1/8" O-flute bit in hardwood on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00183 in per tooth and a feed of 22 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in hardwood on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00285 in per tooth and a feed of 51.4 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in hardwood on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00408 in per tooth and a feed of 73.4 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in hardwood on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00571 in per tooth and a feed of 102.7 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" O-flute bit in hardwood on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00693 in per tooth and a feed of 124.7 IPM (2 sourced rows). Start low and test in scrap.