Bits › 8.0mm tapered ball nose bit › mdf
8.0mm tapered ball nose bit: mdf
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · melamine · softwood
Same material, other bits: all mdf settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools TBN-05M8-DLC | hobby-ultralight | 12000 | 57 | 0.00119 | source |
| High Country Tools TBN-75M8-DLC | hobby-ultralight | 12000 | 57 | 0.00119 | source |
| High Country Tools TBN-05M8-DLC | hobby-light | 16000 | 118.3 | 0.00185 | source |
| High Country Tools TBN-75M8-DLC | hobby-light | 16000 | 118.3 | 0.00185 | source |
| High Country Tools TBN-05M8-DLC | hobby-rigid | 16000 | 169 | 0.00264 | source |
| High Country Tools TBN-75M8-DLC | hobby-rigid | 16000 | 169 | 0.00264 | source |
| High Country Tools TBN-05M8-DLC | business | 16000 | 236.5 | 0.0037 | source |
| High Country Tools TBN-75M8-DLC | business | 16000 | 236.5 | 0.0037 | source |
| High Country Tools TBN-05M8-DLC | industrial | 16000 | 287.2 | 0.00449 | source |
| High Country Tools TBN-75M8-DLC | industrial | 16000 | 287.2 | 0.00449 | source |
FAQ
What feeds and speeds for a 8.0mm tapered ball nose bit in mdf on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00119 in per tooth and a feed of 57 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in mdf on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00185 in per tooth and a feed of 118.3 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in mdf on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00264 in per tooth and a feed of 169 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in mdf on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0037 in per tooth and a feed of 236.5 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in mdf on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00449 in per tooth and a feed of 287.2 IPM (2 sourced rows). Start low and test in scrap.