Bits › 8.0mm tapered ball nose bit › acrylic
8.0mm tapered ball nose bit: acrylic
Other materials: baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all acrylic settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools TBN-05M8-DLC | hobby-ultralight | 12000 | 64.8 | 0.00135 | source |
| High Country Tools TBN-75M8-DLC | hobby-ultralight | 12000 | 64.8 | 0.00135 | source |
| High Country Tools TBN-05M8-DLC | hobby-light | 12500 | 105 | 0.0021 | source |
| High Country Tools TBN-75M8-DLC | hobby-light | 12500 | 105 | 0.0021 | source |
| High Country Tools TBN-05M8-DLC | hobby-rigid | 12500 | 150 | 0.003 | source |
| High Country Tools TBN-75M8-DLC | hobby-rigid | 12500 | 150 | 0.003 | source |
| High Country Tools TBN-05M8-DLC | business | 12500 | 210 | 0.0042 | source |
| High Country Tools TBN-75M8-DLC | business | 12500 | 210 | 0.0042 | source |
| High Country Tools TBN-05M8-DLC | industrial | 12500 | 255 | 0.0051 | source |
| High Country Tools TBN-75M8-DLC | industrial | 12500 | 255 | 0.0051 | source |
FAQ
What feeds and speeds for a 8.0mm tapered ball nose bit in acrylic on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00135 in per tooth and a feed of 64.8 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in acrylic on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0021 in per tooth and a feed of 105 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in acrylic on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.003 in per tooth and a feed of 150 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in acrylic on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0042 in per tooth and a feed of 210 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in acrylic on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0051 in per tooth and a feed of 255 IPM (2 sourced rows). Start low and test in scrap.