Bits › 8.0mm tapered ball nose bit › epoxy resin
8.0mm tapered ball nose bit: epoxy resin
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all epoxy resin settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools TBN-05M8-DLC | hobby-ultralight | 12000 | 41.5 | 0.00086 | source |
| High Country Tools TBN-75M8-DLC | hobby-ultralight | 12000 | 41.5 | 0.00086 | source |
| High Country Tools TBN-05M8-DLC | hobby-light | 14500 | 78 | 0.00134 | source |
| High Country Tools TBN-75M8-DLC | hobby-light | 14500 | 78 | 0.00134 | source |
| High Country Tools TBN-05M8-DLC | hobby-rigid | 14500 | 111.4 | 0.00192 | source |
| High Country Tools TBN-75M8-DLC | hobby-rigid | 14500 | 111.4 | 0.00192 | source |
| High Country Tools TBN-05M8-DLC | business | 14500 | 155.9 | 0.00269 | source |
| High Country Tools TBN-75M8-DLC | business | 14500 | 155.9 | 0.00269 | source |
| High Country Tools TBN-05M8-DLC | industrial | 14500 | 189.3 | 0.00326 | source |
| High Country Tools TBN-75M8-DLC | industrial | 14500 | 189.3 | 0.00326 | source |
FAQ
What feeds and speeds for a 8.0mm tapered ball nose bit in epoxy resin on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00086 in per tooth and a feed of 41.5 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in epoxy resin on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00134 in per tooth and a feed of 78 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in epoxy resin on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00192 in per tooth and a feed of 111.4 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in epoxy resin on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00269 in per tooth and a feed of 155.9 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 8.0mm tapered ball nose bit in epoxy resin on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00326 in per tooth and a feed of 189.3 IPM (2 sourced rows). Start low and test in scrap.