Bits › 3/16" O-flute bit › hdpe / uhmw
3/16" O-flute bit: hdpe / uhmw
Other materials: acrylic · aluminum · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · mdf · melamine · softwood
Same material, other bits: all hdpe / uhmw settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools OF-316D-DLC | hobby-ultralight | 11500 | 37.1 | 0.00322 | source |
| High Country Tools OF-316U-DLC | hobby-ultralight | 11500 | 37.1 | 0.00322 | source |
| High Country Tools OF-316D-DLC | hobby-light | 11500 | 57.7 | 0.00501 | source |
| High Country Tools OF-316U-DLC | hobby-light | 11500 | 57.7 | 0.00501 | source |
| High Country Tools OF-316D-DLC | hobby-rigid | 11500 | 82.4 | 0.00716 | source |
| High Country Tools OF-316U-DLC | hobby-rigid | 11500 | 82.4 | 0.00716 | source |
| High Country Tools OF-316D-DLC | business | 11500 | 115.3 | 0.01003 | source |
| High Country Tools OF-316U-DLC | business | 11500 | 115.3 | 0.01003 | source |
| High Country Tools OF-316D-DLC | industrial | 11500 | 140.1 | 0.01218 | source |
| High Country Tools OF-316U-DLC | industrial | 11500 | 140.1 | 0.01218 | source |
FAQ
What feeds and speeds for a 3/16" O-flute bit in hdpe / uhmw on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00322 in per tooth and a feed of 37.1 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 3/16" O-flute bit in hdpe / uhmw on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00501 in per tooth and a feed of 57.7 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 3/16" O-flute bit in hdpe / uhmw on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00716 in per tooth and a feed of 82.4 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 3/16" O-flute bit in hdpe / uhmw on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.01003 in per tooth and a feed of 115.3 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 3/16" O-flute bit in hdpe / uhmw on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.01218 in per tooth and a feed of 140.1 IPM (2 sourced rows). Start low and test in scrap.