Bits › 3/16" O-flute bit › acrylic
3/16" O-flute bit: acrylic
Other materials: aluminum · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all acrylic settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools OF-316D-DLC | hobby-ultralight | 12000 | 34.5 | 0.00288 | source |
| High Country Tools OF-316U-DLC | hobby-ultralight | 12000 | 34.5 | 0.00288 | source |
| High Country Tools OF-316D-DLC | hobby-light | 12500 | 56 | 0.00448 | source |
| High Country Tools OF-316U-DLC | hobby-light | 12500 | 56 | 0.00448 | source |
| High Country Tools OF-316D-DLC | hobby-rigid | 12500 | 80 | 0.0064 | source |
| High Country Tools OF-316U-DLC | hobby-rigid | 12500 | 80 | 0.0064 | source |
| High Country Tools OF-316D-DLC | business | 12500 | 111.9 | 0.00895 | source |
| High Country Tools OF-316U-DLC | business | 12500 | 111.9 | 0.00895 | source |
| High Country Tools OF-316D-DLC | industrial | 12500 | 135.9 | 0.01087 | source |
| High Country Tools OF-316U-DLC | industrial | 12500 | 135.9 | 0.01087 | source |
FAQ
What feeds and speeds for a 3/16" O-flute bit in acrylic on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00288 in per tooth and a feed of 34.5 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 3/16" O-flute bit in acrylic on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00448 in per tooth and a feed of 56 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 3/16" O-flute bit in acrylic on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0064 in per tooth and a feed of 80 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 3/16" O-flute bit in acrylic on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00895 in per tooth and a feed of 111.9 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 3/16" O-flute bit in acrylic on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.01087 in per tooth and a feed of 135.9 IPM (2 sourced rows). Start low and test in scrap.