Bits › 3/16" O-flute bit › hardwood
3/16" O-flute bit: hardwood
Other materials: acrylic · aluminum · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all hardwood settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools OF-316D-DLC | hobby-ultralight | 12000 | 27.6 | 0.0023 | source |
| High Country Tools OF-316U-DLC | hobby-ultralight | 12000 | 27.6 | 0.0023 | source |
| High Country Tools OF-316D-DLC | hobby-light | 18000 | 64.5 | 0.00358 | source |
| High Country Tools OF-316U-DLC | hobby-light | 18000 | 64.5 | 0.00358 | source |
| High Country Tools OF-316D-DLC | hobby-rigid | 18000 | 92.1 | 0.00512 | source |
| High Country Tools OF-316U-DLC | hobby-rigid | 18000 | 92.1 | 0.00512 | source |
| High Country Tools OF-316D-DLC | business | 18000 | 129 | 0.00716 | source |
| High Country Tools OF-316U-DLC | business | 18000 | 129 | 0.00716 | source |
| High Country Tools OF-316D-DLC | industrial | 18000 | 156.6 | 0.0087 | source |
| High Country Tools OF-316U-DLC | industrial | 18000 | 156.6 | 0.0087 | source |
FAQ
What feeds and speeds for a 3/16" O-flute bit in hardwood on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0023 in per tooth and a feed of 27.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 3/16" O-flute bit in hardwood on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00358 in per tooth and a feed of 64.5 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 3/16" O-flute bit in hardwood on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00512 in per tooth and a feed of 92.1 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 3/16" O-flute bit in hardwood on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00716 in per tooth and a feed of 129 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 3/16" O-flute bit in hardwood on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0087 in per tooth and a feed of 156.6 IPM (2 sourced rows). Start low and test in scrap.