Bits › 1/8" upcut end mill › mdf
1/8" upcut end mill: mdf
Other materials: abs · acrylic · aluminum · baltic birch plywood · cast acrylic · dense hardwood (maple, oak) · epoxy resin · extruded acrylic · hardwood · hdpe / uhmw · melamine · polycarbonate (lexan) · softwood
Same material, other bits: all mdf settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools END-18U-DLC | hobby-ultralight | 12000 | 19.8 | 0.00083 | source |
| High Country Tools END-18U18-DLC | hobby-ultralight | 12000 | 19.8 | 0.00083 | source |
| High Country Tools END-18U-DLC | hobby-light | 17000 | 43.6 | 0.00128 | source |
| High Country Tools END-18U18-DLC | hobby-light | 17000 | 43.6 | 0.00128 | source |
| High Country Tools END-18U-DLC | hobby-rigid | 17000 | 62.3 | 0.00183 | source |
| High Country Tools END-18U18-DLC | hobby-rigid | 17000 | 62.3 | 0.00183 | source |
| High Country Tools END-18U-DLC | business | 17000 | 87.3 | 0.00257 | source |
| High Country Tools END-18U18-DLC | business | 17000 | 87.3 | 0.00257 | source |
| High Country Tools END-18U-DLC | industrial | 17000 | 106 | 0.00312 | source |
| High Country Tools END-18U18-DLC | industrial | 17000 | 106 | 0.00312 | source |
| SpeTool Carbide | any | 18000 | 160 | 0.0045 | source |
FAQ
What feeds and speeds for a 1/8" upcut end mill in mdf on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00083 in per tooth and a feed of 19.8 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in mdf on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00128 in per tooth and a feed of 43.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in mdf on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00183 in per tooth and a feed of 62.3 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in mdf on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00257 in per tooth and a feed of 87.3 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in mdf on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00312 in per tooth and a feed of 106 IPM (2 sourced rows). Start low and test in scrap.