Bits › 1/8" upcut end mill › baltic birch plywood
1/8" upcut end mill: baltic birch plywood
Other materials: abs · acrylic · aluminum · cast acrylic · dense hardwood (maple, oak) · epoxy resin · extruded acrylic · hardwood · hdpe / uhmw · mdf · melamine · polycarbonate (lexan) · softwood
Same material, other bits: all baltic birch plywood settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools END-18U-DLC | hobby-ultralight | 12000 | 17.1 | 0.00071 | source |
| High Country Tools END-18U18-DLC | hobby-ultralight | 12000 | 17.1 | 0.00071 | source |
| High Country Tools END-18U-DLC | hobby-light | 18000 | 39.9 | 0.00111 | source |
| High Country Tools END-18U18-DLC | hobby-light | 18000 | 39.9 | 0.00111 | source |
| High Country Tools END-18U-DLC | hobby-rigid | 18000 | 57 | 0.00158 | source |
| High Country Tools END-18U18-DLC | hobby-rigid | 18000 | 57 | 0.00158 | source |
| High Country Tools END-18U-DLC | business | 18000 | 79.8 | 0.00222 | source |
| High Country Tools END-18U18-DLC | business | 18000 | 79.8 | 0.00222 | source |
| High Country Tools END-18U-DLC | industrial | 18000 | 96.9 | 0.00269 | source |
| High Country Tools END-18U18-DLC | industrial | 18000 | 96.9 | 0.00269 | source |
FAQ
What feeds and speeds for a 1/8" upcut end mill in baltic birch plywood on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00071 in per tooth and a feed of 17.1 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in baltic birch plywood on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00111 in per tooth and a feed of 39.9 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in baltic birch plywood on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00158 in per tooth and a feed of 57 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in baltic birch plywood on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00222 in per tooth and a feed of 79.8 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in baltic birch plywood on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00269 in per tooth and a feed of 96.9 IPM (2 sourced rows). Start low and test in scrap.