Bits › 1/8" upcut end mill › dense hardwood (maple, oak)
1/8" upcut end mill: dense hardwood (maple, oak)
Other materials: abs · acrylic · aluminum · baltic birch plywood · cast acrylic · epoxy resin · extruded acrylic · hardwood · hdpe / uhmw · mdf · melamine · polycarbonate (lexan) · softwood
Same material, other bits: all dense hardwood (maple, oak) settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools END-18U-DLC | hobby-ultralight | 12000 | 16.2 | 0.00068 | source |
| High Country Tools END-18U18-DLC | hobby-ultralight | 12000 | 16.2 | 0.00068 | source |
| High Country Tools END-18U-DLC | hobby-light | 18000 | 37.8 | 0.00105 | source |
| High Country Tools END-18U18-DLC | hobby-light | 18000 | 37.8 | 0.00105 | source |
| High Country Tools END-18U-DLC | hobby-rigid | 18000 | 54 | 0.0015 | source |
| High Country Tools END-18U18-DLC | hobby-rigid | 18000 | 54 | 0.0015 | source |
| High Country Tools END-18U-DLC | business | 18000 | 75.6 | 0.0021 | source |
| High Country Tools END-18U18-DLC | business | 18000 | 75.6 | 0.0021 | source |
| High Country Tools END-18U-DLC | industrial | 18000 | 91.8 | 0.00255 | source |
| High Country Tools END-18U18-DLC | industrial | 18000 | 91.8 | 0.00255 | source |
FAQ
What feeds and speeds for a 1/8" upcut end mill in dense hardwood (maple, oak) on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00068 in per tooth and a feed of 16.2 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in dense hardwood (maple, oak) on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00105 in per tooth and a feed of 37.8 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in dense hardwood (maple, oak) on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0015 in per tooth and a feed of 54 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in dense hardwood (maple, oak) on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0021 in per tooth and a feed of 75.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/8" upcut end mill in dense hardwood (maple, oak) on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00255 in per tooth and a feed of 91.8 IPM (2 sourced rows). Start low and test in scrap.