Bits › 1/4" O-flute bit › mdf
1/4" O-flute bit: mdf
Other materials: acrylic · aluminum · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · melamine · softwood
Same material, other bits: all mdf settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools OFS-14U-DLC | hobby-ultralight | 12000 | 35.7 | 0.00298 | source |
| High Country Tools OFL-14U-DLC | hobby-ultralight | 12000 | 35.7 | 0.00298 | source |
| High Country Tools OFS-14U-DLC | hobby-light | 17000 | 78.7 | 0.00463 | source |
| High Country Tools OFL-14U-DLC | hobby-light | 17000 | 78.7 | 0.00463 | source |
| High Country Tools OFS-14U-DLC | hobby-rigid | 17000 | 112.4 | 0.00661 | source |
| High Country Tools OFL-14U-DLC | hobby-rigid | 17000 | 112.4 | 0.00661 | source |
| High Country Tools OFS-14U-DLC | business | 17000 | 157.4 | 0.00926 | source |
| High Country Tools OFL-14U-DLC | business | 17000 | 157.4 | 0.00926 | source |
| High Country Tools OFS-14U-DLC | industrial | 17000 | 191.2 | 0.01124 | source |
| High Country Tools OFL-14U-DLC | industrial | 17000 | 191.2 | 0.01124 | source |
| SpeTool O-flute | any | 18000 | 180 | 0.01 | source |
FAQ
What feeds and speeds for a 1/4" O-flute bit in mdf on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00298 in per tooth and a feed of 35.7 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in mdf on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00463 in per tooth and a feed of 78.7 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in mdf on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00661 in per tooth and a feed of 112.4 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in mdf on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00926 in per tooth and a feed of 157.4 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in mdf on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.01124 in per tooth and a feed of 191.2 IPM (2 sourced rows). Start low and test in scrap.