Bits › 1/4" O-flute bit › acrylic
1/4" O-flute bit: acrylic
Other materials: aluminum · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all acrylic settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools OFS-14U-DLC | hobby-ultralight | 12000 | 40.6 | 0.00338 | source |
| High Country Tools OFL-14U-DLC | hobby-ultralight | 12000 | 40.6 | 0.00338 | source |
| High Country Tools OFS-14U-DLC | hobby-light | 12500 | 65.8 | 0.00526 | source |
| High Country Tools OFL-14U-DLC | hobby-light | 12500 | 65.8 | 0.00526 | source |
| High Country Tools OFS-14U-DLC | hobby-rigid | 12500 | 94 | 0.00752 | source |
| High Country Tools OFL-14U-DLC | hobby-rigid | 12500 | 94 | 0.00752 | source |
| High Country Tools OFS-14U-DLC | business | 12500 | 131.5 | 0.01052 | source |
| High Country Tools OFL-14U-DLC | business | 12500 | 131.5 | 0.01052 | source |
| High Country Tools OFS-14U-DLC | industrial | 12500 | 159.7 | 0.01278 | source |
| High Country Tools OFL-14U-DLC | industrial | 12500 | 159.7 | 0.01278 | source |
| SpeTool O-flute | any | 18000 | 144 | 0.008 | source |
FAQ
What feeds and speeds for a 1/4" O-flute bit in acrylic on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00338 in per tooth and a feed of 40.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in acrylic on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00526 in per tooth and a feed of 65.8 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in acrylic on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00752 in per tooth and a feed of 94 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in acrylic on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.01052 in per tooth and a feed of 131.5 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in acrylic on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.01278 in per tooth and a feed of 159.7 IPM (2 sourced rows). Start low and test in scrap.