Bits › 1/4" O-flute bit › hdpe / uhmw
1/4" O-flute bit: hdpe / uhmw
Other materials: acrylic · aluminum · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · mdf · melamine · softwood
Same material, other bits: all hdpe / uhmw settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools OFS-14U-DLC | hobby-ultralight | 11500 | 43.6 | 0.00379 | source |
| High Country Tools OFL-14U-DLC | hobby-ultralight | 11500 | 43.6 | 0.00379 | source |
| High Country Tools OFS-14U-DLC | hobby-light | 11500 | 67.8 | 0.00589 | source |
| High Country Tools OFL-14U-DLC | hobby-light | 11500 | 67.8 | 0.00589 | source |
| High Country Tools OFS-14U-DLC | hobby-rigid | 11500 | 96.8 | 0.00842 | source |
| High Country Tools OFL-14U-DLC | hobby-rigid | 11500 | 96.8 | 0.00842 | source |
| High Country Tools OFS-14U-DLC | business | 11500 | 135.5 | 0.01179 | source |
| High Country Tools OFL-14U-DLC | business | 11500 | 135.5 | 0.01179 | source |
| High Country Tools OFS-14U-DLC | industrial | 11500 | 164.6 | 0.01431 | source |
| High Country Tools OFL-14U-DLC | industrial | 11500 | 164.6 | 0.01431 | source |
FAQ
What feeds and speeds for a 1/4" O-flute bit in hdpe / uhmw on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00379 in per tooth and a feed of 43.6 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in hdpe / uhmw on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00589 in per tooth and a feed of 67.8 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in hdpe / uhmw on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00842 in per tooth and a feed of 96.8 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in hdpe / uhmw on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.01179 in per tooth and a feed of 135.5 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/4" O-flute bit in hdpe / uhmw on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.01431 in per tooth and a feed of 164.6 IPM (2 sourced rows). Start low and test in scrap.