Bits › 69.8mm surfacing bit › melamine
69.8mm surfacing bit: melamine
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · mdf · softwood
Same material, other bits: all melamine settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools RIP-4W-2.75 | hobby-ultralight | 12000 | 57.4 | 0.0012 | source |
| High Country Tools RIP-4W-2.75 | hobby-light | 14000 | 104.1 | 0.00186 | source |
| High Country Tools RIP-4W-2.75 | hobby-rigid | 14000 | 148.8 | 0.00266 | source |
| High Country Tools RIP-4W-2.75 | business | 14000 | 208.2 | 0.00372 | source |
| High Country Tools RIP-4W-2.75 | industrial | 14000 | 252.9 | 0.00452 | source |
FAQ
What feeds and speeds for a 69.8mm surfacing bit in melamine on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0012 in per tooth and a feed of 57.4 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 69.8mm surfacing bit in melamine on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00186 in per tooth and a feed of 104.1 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 69.8mm surfacing bit in melamine on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00266 in per tooth and a feed of 148.8 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 69.8mm surfacing bit in melamine on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00372 in per tooth and a feed of 208.2 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 69.8mm surfacing bit in melamine on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00452 in per tooth and a feed of 252.9 IPM (1 sourced row). Start low and test in scrap.