Bits › 69.8mm surfacing bit › baltic birch plywood
69.8mm surfacing bit: baltic birch plywood
Other materials: acrylic · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all baltic birch plywood settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools RIP-4W-2.75 | hobby-ultralight | 12000 | 64.1 | 0.00134 | source |
| High Country Tools RIP-4W-2.75 | hobby-light | 14000 | 116.4 | 0.00208 | source |
| High Country Tools RIP-4W-2.75 | hobby-rigid | 14000 | 166.2 | 0.00297 | source |
| High Country Tools RIP-4W-2.75 | business | 14000 | 232.7 | 0.00416 | source |
| High Country Tools RIP-4W-2.75 | industrial | 14000 | 282.6 | 0.00505 | source |
FAQ
What feeds and speeds for a 69.8mm surfacing bit in baltic birch plywood on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00134 in per tooth and a feed of 64.1 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 69.8mm surfacing bit in baltic birch plywood on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00208 in per tooth and a feed of 116.4 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 69.8mm surfacing bit in baltic birch plywood on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00297 in per tooth and a feed of 166.2 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 69.8mm surfacing bit in baltic birch plywood on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00416 in per tooth and a feed of 232.7 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 69.8mm surfacing bit in baltic birch plywood on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00505 in per tooth and a feed of 282.6 IPM (1 sourced row). Start low and test in scrap.