Bits › 5.0mm drill bit › hdpe / uhmw
5.0mm drill bit: hdpe / uhmw
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · mdf · melamine · softwood
Same material, other bits: all hdpe / uhmw settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools PT-145 | hobby-ultralight | 11500 | 33.9 | 0.00147 | source |
| High Country Tools BP-145 | hobby-ultralight | 11500 | 33.9 | 0.00147 | source |
| High Country Tools PT-145 | hobby-light | 11500 | 52.7 | 0.00229 | source |
| High Country Tools BP-145 | hobby-light | 11500 | 52.7 | 0.00229 | source |
| High Country Tools PT-145 | hobby-rigid | 11500 | 75.3 | 0.00327 | source |
| High Country Tools BP-145 | hobby-rigid | 11500 | 75.3 | 0.00327 | source |
| High Country Tools PT-145 | business | 11500 | 105.4 | 0.00458 | source |
| High Country Tools BP-145 | business | 11500 | 105.4 | 0.00458 | source |
| High Country Tools PT-145 | industrial | 11500 | 127.9 | 0.00556 | source |
| High Country Tools BP-145 | industrial | 11500 | 127.9 | 0.00556 | source |
FAQ
What feeds and speeds for a 5.0mm drill bit in hdpe / uhmw on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00147 in per tooth and a feed of 33.9 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 5.0mm drill bit in hdpe / uhmw on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00229 in per tooth and a feed of 52.7 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 5.0mm drill bit in hdpe / uhmw on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00327 in per tooth and a feed of 75.3 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 5.0mm drill bit in hdpe / uhmw on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00458 in per tooth and a feed of 105.4 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 5.0mm drill bit in hdpe / uhmw on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00556 in per tooth and a feed of 127.9 IPM (2 sourced rows). Start low and test in scrap.