Bits › 5.0mm drill bit › epoxy resin
5.0mm drill bit: epoxy resin
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all epoxy resin settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools PT-145 | hobby-ultralight | 12000 | 20.2 | 0.00084 | source |
| High Country Tools BP-145 | hobby-ultralight | 12000 | 20.2 | 0.00084 | source |
| High Country Tools PT-145 | hobby-light | 14500 | 38 | 0.00131 | source |
| High Country Tools BP-145 | hobby-light | 14500 | 38 | 0.00131 | source |
| High Country Tools PT-145 | hobby-rigid | 14500 | 54.2 | 0.00187 | source |
| High Country Tools BP-145 | hobby-rigid | 14500 | 54.2 | 0.00187 | source |
| High Country Tools PT-145 | business | 14500 | 75.9 | 0.00262 | source |
| High Country Tools BP-145 | business | 14500 | 75.9 | 0.00262 | source |
| High Country Tools PT-145 | industrial | 14500 | 92.2 | 0.00318 | source |
| High Country Tools BP-145 | industrial | 14500 | 92.2 | 0.00318 | source |
FAQ
What feeds and speeds for a 5.0mm drill bit in epoxy resin on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00084 in per tooth and a feed of 20.2 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 5.0mm drill bit in epoxy resin on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00131 in per tooth and a feed of 38 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 5.0mm drill bit in epoxy resin on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00187 in per tooth and a feed of 54.2 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 5.0mm drill bit in epoxy resin on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00262 in per tooth and a feed of 75.9 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 5.0mm drill bit in epoxy resin on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00318 in per tooth and a feed of 92.2 IPM (2 sourced rows). Start low and test in scrap.