Bits › 1/2" roughing end mill › epoxy resin
1/2" roughing end mill: epoxy resin
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all epoxy resin settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools RIPPER-12-DLC | hobby-ultralight | 12000 | 24 | 0.00067 | source |
| High Country Tools RIPPER-12-DLC | hobby-light | 14500 | 45.1 | 0.00104 | source |
| High Country Tools RIPPER-12-DLC | hobby-rigid | 14500 | 64.4 | 0.00148 | source |
| High Country Tools RIPPER-12-DLC | business | 14500 | 90.1 | 0.00207 | source |
| High Country Tools RIPPER-12-DLC | industrial | 14500 | 109.4 | 0.00252 | source |
FAQ
What feeds and speeds for a 1/2" roughing end mill in epoxy resin on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00067 in per tooth and a feed of 24 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" roughing end mill in epoxy resin on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00104 in per tooth and a feed of 45.1 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" roughing end mill in epoxy resin on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00148 in per tooth and a feed of 64.4 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" roughing end mill in epoxy resin on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00207 in per tooth and a feed of 90.1 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" roughing end mill in epoxy resin on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00252 in per tooth and a feed of 109.4 IPM (1 sourced row). Start low and test in scrap.