Bits › 1/2" roughing end mill › baltic birch plywood
1/2" roughing end mill: baltic birch plywood
Other materials: acrylic · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all baltic birch plywood settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools RIPPER-12-DLC | hobby-ultralight | 12000 | 28.5 | 0.00079 | source |
| High Country Tools RIPPER-12-DLC | hobby-light | 18000 | 66.4 | 0.00123 | source |
| High Country Tools RIPPER-12-DLC | hobby-rigid | 18000 | 94.9 | 0.00176 | source |
| High Country Tools RIPPER-12-DLC | business | 18000 | 132.9 | 0.00246 | source |
| High Country Tools RIPPER-12-DLC | industrial | 18000 | 161.3 | 0.00299 | source |
FAQ
What feeds and speeds for a 1/2" roughing end mill in baltic birch plywood on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00079 in per tooth and a feed of 28.5 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" roughing end mill in baltic birch plywood on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00123 in per tooth and a feed of 66.4 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" roughing end mill in baltic birch plywood on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00176 in per tooth and a feed of 94.9 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" roughing end mill in baltic birch plywood on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00246 in per tooth and a feed of 132.9 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" roughing end mill in baltic birch plywood on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00299 in per tooth and a feed of 161.3 IPM (1 sourced row). Start low and test in scrap.