ChipLoad

Feeds & speeds for melamine

345 sourced settings. By bit: 1" roundover bit · 1/16" downcut end mill · 1/2" ball nose bit · 1/2" compression bit · 1/2" downcut end mill · 1/2" roughing end mill · 1/2" roundover bit · 1/2" upcut end mill · 1/4" 15-degree V-bit · 1/4" 30-degree V-bit · 1/4" 60-degree V-bit · 1/4" 90-degree V-bit · 1/4" O-flute bit · 1/4" ball nose bit · 1/4" compression bit · 1/4" downcut end mill · 1/4" roughing end mill · 1/4" roundover bit · 1/4" tapered ball nose bit · 1/4" upcut end mill · 1/8" O-flute bit · 1/8" compression bit · 1/8" downcut end mill · 1/8" upcut end mill · 3/16" O-flute bit · 3/16" compression bit · 3/16" downcut end mill · 3/16" roundover bit · 3/4" roundover bit · 3/8" 30-degree V-bit · 3/8" 60-degree V-bit · 3/8" 90-degree V-bit · 3/8" compression bit · 3/8" downcut end mill · 3/8" keyhole / slot bit · 3/8" roughing end mill · 3/8" roundover bit · 3/8" tapered ball nose bit · 3/8" upcut end mill · 31.8mm dovetail bit · 34.9mm surfacing bit · 4.0mm compression bit · 5.0mm drill bit · 69.8mm surfacing bit · 8.0mm tapered ball nose bit

FAQ

What feeds and speeds for a bit in melamine on a hobby-ultralight CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00047–0.0023 in per tooth and a feed of 8.3–57.4 IPM (69 sourced rows). Start low and test in scrap.

What feeds and speeds for a bit in melamine on a hobby-light CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00073–0.00358 in per tooth and a feed of 19.3–110.7 IPM (69 sourced rows). Start low and test in scrap.

What feeds and speeds for a bit in melamine on a hobby-rigid CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00104–0.00511 in per tooth and a feed of 27.5–158.2 IPM (69 sourced rows). Start low and test in scrap.

What feeds and speeds for a bit in melamine on a business CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00146–0.00716 in per tooth and a feed of 38.6–221.5 IPM (69 sourced rows). Start low and test in scrap.

What feeds and speeds for a bit in melamine on a industrial CNC router?
Published maker data (High Country Tools) gives a chip load of 0.00177–0.00869 in per tooth and a feed of 46.8–268.9 IPM (69 sourced rows). Start low and test in scrap.

Weekly "what changed" email: coming soon

We'll email you when a maker updates their feeds and speeds.