Machines › Industrial › Haas GR series
Haas GR series gantry routers
ChipLoad files the GR series under the Industrial machine class (our grouping, not High Country Tools'). Specs below come only from Haas's own published pages. Where Haas publishes nothing, we list nothing.
Spindle limit: the GR-510 and GR-712 standard spindle tops out at 8,100 rpm, well under the 16,000-24,000 rpm many router-bit charts assume. Pick the machine in the calculator to cap RPM and recalculate the feed.
Haas GR-510
Not listed on haascnc.com today (current page 404s); specs from Haas's own archived page.
| Spec | Value |
|---|---|
| Travels (X × Y × Z) | 121 × 61 × 11 in (3073 × 1549 × 279 mm) |
| Spindle max speed | 8,100 rpm |
| Spindle max rating | 15 hp (11.2 kW) |
| Max torque | 48 ft-lbf @ 1,500 rpm |
| Drive | Direct Speed, belt drive |
| Taper | CT or BT 40 |
| Table | 122 × 53 in |
| Max cutting feed | 800 ipm |
| Tool changer | 10-pocket carousel, 3.5 in max tool dia |
Source: www.haascnc.com/machines/vertical-mills/gantry/models/gr-510.html
Haas GR-712
Not listed on haascnc.com today (current page 404s); specs from Haas's own archived page.
| Spec | Value |
|---|---|
| Travels (X × Y × Z) | 145 × 85 × 11 in (3683 × 2159 × 279 mm) |
| Spindle max speed | 8,100 rpm |
| Spindle max rating | 15 hp (11.2 kW) |
| Max torque | 48 ft-lbf @ 1,500 rpm |
| Drive | Direct Speed, belt drive |
| Taper | CT or BT 40 |
| Table | 144 × 72 × 1 in aluminum |
| Max cutting feed | 800 ipm |
| Tool changer | 10-pocket carousel |
Source: www.haascnc.com/machines/vertical-mills/gantry/models/gr-712.html
Haas GR-408
Older model. We found no spec page published by Haas, so no specs are listed.
Source: none published by the manufacturer that we could find