Bits › 4.0mm compression bit › epoxy resin
4.0mm compression bit: epoxy resin
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · hardwood · hdpe / uhmw · mdf · melamine · plastic · softwood · wood / mdf
Same material, other bits: all epoxy resin settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools COM-4mm-DLC | hobby-ultralight | 12000 | 17.8 | 0.00074 | source |
| High Country Tools COM-4mm-DLC | hobby-light | 14500 | 33.5 | 0.00115 | source |
| High Country Tools COM-4mm-DLC | hobby-rigid | 14500 | 47.8 | 0.00165 | source |
| High Country Tools COM-4mm-DLC | business | 14500 | 67 | 0.00231 | source |
| High Country Tools COM-4mm-DLC | industrial | 14500 | 81.3 | 0.0028 | source |
FAQ
What feeds and speeds for a 4.0mm compression bit in epoxy resin on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00074 in per tooth and a feed of 17.8 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 4.0mm compression bit in epoxy resin on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00115 in per tooth and a feed of 33.5 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 4.0mm compression bit in epoxy resin on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00165 in per tooth and a feed of 47.8 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 4.0mm compression bit in epoxy resin on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00231 in per tooth and a feed of 67 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 4.0mm compression bit in epoxy resin on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0028 in per tooth and a feed of 81.3 IPM (1 sourced row). Start low and test in scrap.