Bits › 34.9mm surfacing bit › dense hardwood (maple, oak)
34.9mm surfacing bit: dense hardwood (maple, oak)
Other materials: acrylic · baltic birch plywood · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all dense hardwood (maple, oak) settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools SUR-3W-DLC | hobby-ultralight | 12000 | 36.5 | 0.00101 | source |
| High Country Tools SUR-3W-DLC | hobby-light | 16000 | 75.6 | 0.00158 | source |
| High Country Tools SUR-3W-DLC | hobby-rigid | 16000 | 108 | 0.00225 | source |
| High Country Tools SUR-3W-DLC | business | 16000 | 151.2 | 0.00315 | source |
| High Country Tools SUR-3W-DLC | industrial | 16000 | 183.6 | 0.00382 | source |
FAQ
What feeds and speeds for a 34.9mm surfacing bit in dense hardwood (maple, oak) on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00101 in per tooth and a feed of 36.5 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 34.9mm surfacing bit in dense hardwood (maple, oak) on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00158 in per tooth and a feed of 75.6 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 34.9mm surfacing bit in dense hardwood (maple, oak) on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00225 in per tooth and a feed of 108 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 34.9mm surfacing bit in dense hardwood (maple, oak) on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00315 in per tooth and a feed of 151.2 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 34.9mm surfacing bit in dense hardwood (maple, oak) on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00382 in per tooth and a feed of 183.6 IPM (1 sourced row). Start low and test in scrap.