Bits › 3/8" upcut end mill › acrylic
3/8" upcut end mill: acrylic
Other materials: abs · baltic birch plywood · cast acrylic · dense hardwood (maple, oak) · epoxy resin · extruded acrylic · hardwood · hdpe / uhmw · mdf · melamine · polycarbonate (lexan) · softwood
Same material, other bits: all acrylic settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools END-38U-DLC | hobby-ultralight | 12000 | 56.2 | 0.00117 | source |
| High Country Tools END-38U-DLC | hobby-light | 12500 | 91.1 | 0.00182 | source |
| High Country Tools END-38U-DLC | hobby-rigid | 12500 | 130.2 | 0.0026 | source |
| High Country Tools END-38U-DLC | business | 12500 | 182.3 | 0.00365 | source |
| High Country Tools END-38U-DLC | industrial | 12500 | 221.3 | 0.00443 | source |
FAQ
What feeds and speeds for a 3/8" upcut end mill in acrylic on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00117 in per tooth and a feed of 56.2 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/8" upcut end mill in acrylic on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00182 in per tooth and a feed of 91.1 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/8" upcut end mill in acrylic on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0026 in per tooth and a feed of 130.2 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/8" upcut end mill in acrylic on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00365 in per tooth and a feed of 182.3 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/8" upcut end mill in acrylic on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00443 in per tooth and a feed of 221.3 IPM (1 sourced row). Start low and test in scrap.