Bits › 3/8" tapered ball nose bit › baltic birch plywood
3/8" tapered ball nose bit: baltic birch plywood
Other materials: acrylic · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all baltic birch plywood settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools TBN-1838-DLC | hobby-ultralight | 12000 | 49.9 | 0.00104 | source |
| High Country Tools TBN-1838-DLC | hobby-light | 16000 | 103.5 | 0.00162 | source |
| High Country Tools TBN-1838-DLC | hobby-rigid | 16000 | 147.8 | 0.00231 | source |
| High Country Tools TBN-1838-DLC | business | 16000 | 206.9 | 0.00323 | source |
| High Country Tools TBN-1838-DLC | industrial | 16000 | 251.3 | 0.00393 | source |
FAQ
What feeds and speeds for a 3/8" tapered ball nose bit in baltic birch plywood on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00104 in per tooth and a feed of 49.9 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/8" tapered ball nose bit in baltic birch plywood on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00162 in per tooth and a feed of 103.5 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/8" tapered ball nose bit in baltic birch plywood on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00231 in per tooth and a feed of 147.8 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/8" tapered ball nose bit in baltic birch plywood on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00323 in per tooth and a feed of 206.9 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/8" tapered ball nose bit in baltic birch plywood on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00393 in per tooth and a feed of 251.3 IPM (1 sourced row). Start low and test in scrap.