ChipLoad

3/8" roughing end mill feeds and speeds

45 sourced settings from High Country Tools. Published chip loads range from 0.00067 to 0.00441 in per tooth. Pick your material:

acrylic (5) · baltic birch plywood (5) · dense hardwood (maple, oak) (5) · epoxy resin (5) · hardwood (5) · hdpe / uhmw (5) · mdf (5) · melamine (5) · softwood (5)

Open the calculator →

FAQ

What feeds and speeds for a 3/8" roughing end mill on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00067–0.00117 in per tooth and a feed of 24–40.3 IPM (9 sourced rows). Start low and test in scrap.

What feeds and speeds for a 3/8" roughing end mill on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00104–0.00181 in per tooth and a feed of 45.1–76 IPM (9 sourced rows). Start low and test in scrap.

What feeds and speeds for a 3/8" roughing end mill on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00148–0.00259 in per tooth and a feed of 64.4–108.6 IPM (9 sourced rows). Start low and test in scrap.

What feeds and speeds for a 3/8" roughing end mill on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00207–0.00363 in per tooth and a feed of 90.2–152.1 IPM (9 sourced rows). Start low and test in scrap.

What feeds and speeds for a 3/8" roughing end mill on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00252–0.00441 in per tooth and a feed of 109.6–184.7 IPM (9 sourced rows). Start low and test in scrap.