Bits › 3/8" 60-degree V-bit › dense hardwood (maple, oak)
3/8" 60-degree V-bit: dense hardwood (maple, oak)
Other materials: acrylic · aluminum · baltic birch plywood · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine · softwood
Same material, other bits: all dense hardwood (maple, oak) settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools VBI-375-60 | hobby-ultralight | 12000 | 40.1 | 0.00111 | source |
| High Country Tools VBI-375-60 | hobby-light | 18000 | 93.5 | 0.00173 | source |
| High Country Tools VBI-375-60 | hobby-rigid | 18000 | 133.6 | 0.00247 | source |
| High Country Tools VBI-375-60 | business | 18000 | 187 | 0.00346 | source |
| High Country Tools VBI-375-60 | industrial | 18000 | 227.1 | 0.0042 | source |
FAQ
What feeds and speeds for a 3/8" 60-degree V-bit in dense hardwood (maple, oak) on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00111 in per tooth and a feed of 40.1 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/8" 60-degree V-bit in dense hardwood (maple, oak) on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00173 in per tooth and a feed of 93.5 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/8" 60-degree V-bit in dense hardwood (maple, oak) on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00247 in per tooth and a feed of 133.6 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/8" 60-degree V-bit in dense hardwood (maple, oak) on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00346 in per tooth and a feed of 187 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/8" 60-degree V-bit in dense hardwood (maple, oak) on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0042 in per tooth and a feed of 227.1 IPM (1 sourced row). Start low and test in scrap.