Bits › 3/16" downcut end mill › baltic birch plywood
3/16" downcut end mill: baltic birch plywood
Other materials: abs · acetal / delrin (pom) · acrylic · aluminum · cast acrylic · dense hardwood (maple, oak) · epoxy resin · extruded acrylic · hardwood · hdpe / uhmw · mdf · melamine · polycarbonate (lexan) · softwood
Same material, other bits: all baltic birch plywood settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools END-316D-DLC | hobby-ultralight | 12000 | 23.3 | 0.00097 | source |
| High Country Tools END-316D-DLC | hobby-light | 18000 | 54.4 | 0.00151 | source |
| High Country Tools END-316D-DLC | hobby-rigid | 18000 | 77.8 | 0.00216 | source |
| High Country Tools END-316D-DLC | business | 18000 | 108.9 | 0.00302 | source |
| High Country Tools END-316D-DLC | industrial | 18000 | 132.2 | 0.00367 | source |
FAQ
What feeds and speeds for a 3/16" downcut end mill in baltic birch plywood on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00097 in per tooth and a feed of 23.3 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/16" downcut end mill in baltic birch plywood on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00151 in per tooth and a feed of 54.4 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/16" downcut end mill in baltic birch plywood on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00216 in per tooth and a feed of 77.8 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/16" downcut end mill in baltic birch plywood on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00302 in per tooth and a feed of 108.9 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/16" downcut end mill in baltic birch plywood on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00367 in per tooth and a feed of 132.2 IPM (1 sourced row). Start low and test in scrap.