Bits › 3/16" compression bit › epoxy resin
3/16" compression bit: epoxy resin
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · hardwood · hdpe / uhmw · mdf · melamine · plastic · softwood · wood / mdf
Same material, other bits: all epoxy resin settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools MCO-316-DLC | hobby-ultralight | 12000 | 19.6 | 0.00082 | source |
| High Country Tools MCO-316-DLC | hobby-light | 14500 | 36.9 | 0.00127 | source |
| High Country Tools MCO-316-DLC | hobby-rigid | 14500 | 52.8 | 0.00182 | source |
| High Country Tools MCO-316-DLC | business | 14500 | 73.9 | 0.00255 | source |
| High Country Tools MCO-316-DLC | industrial | 14500 | 89.7 | 0.00309 | source |
FAQ
What feeds and speeds for a 3/16" compression bit in epoxy resin on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00082 in per tooth and a feed of 19.6 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/16" compression bit in epoxy resin on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00127 in per tooth and a feed of 36.9 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/16" compression bit in epoxy resin on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00182 in per tooth and a feed of 52.8 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/16" compression bit in epoxy resin on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00255 in per tooth and a feed of 73.9 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 3/16" compression bit in epoxy resin on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00309 in per tooth and a feed of 89.7 IPM (1 sourced row). Start low and test in scrap.