Bits › 15.9mm Onsrud series (hard plywood)
15.9mm Onsrud series (hard plywood) feeds and speeds
14 sourced settings from Onsrud. Published chip loads range from 0.003 to 0.032 in per tooth. Pick your material:
wood / mdf (14)
| Manufacturer / bit | Material | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|---|
| Onsrud Series | Hard plywood | industrial | – | – | 0.008–0.01 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.009–0.011 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.009–0.011 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.018–0.02 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.021–0.023 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.003–0.005 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.02–0.022 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.023–0.025 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.023–0.025 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.022–0.025 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.03–0.032 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.029–0.031 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.021–0.023 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.017–0.019 | source |
FAQ
What feeds and speeds for a 15.9mm Onsrud series (hard plywood) on a industrial CNC router?
Published manufacturer data (Onsrud) gives a chip load of 0.003–0.032 in per tooth and a feed of – IPM (14 sourced rows). Start low and test in scrap.