Bits › 1" Onsrud series (hard plywood)
1" Onsrud series (hard plywood) feeds and speeds
3 sourced settings from Onsrud. Published chip loads range from 0.004 to 0.013 in per tooth. Pick your material:
wood / mdf (3)
| Manufacturer / bit | Material | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|---|
| Onsrud Series | Hard plywood | industrial | – | – | 0.008–0.01 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.004–0.006 | source |
| Onsrud Series | Hard plywood | industrial | – | – | 0.011–0.013 | source |
FAQ
What feeds and speeds for a 1" Onsrud series (hard plywood) on a industrial CNC router?
Published manufacturer data (Onsrud) gives a chip load of 0.004–0.013 in per tooth and a feed of – IPM (3 sourced rows). Start low and test in scrap.