Bits › 1/4" roughing end mill › melamine
1/4" roughing end mill: melamine
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · mdf · softwood
Same material, other bits: all melamine settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools RIPPER-14-DLC | hobby-ultralight | 12000 | 25.5 | 0.00071 | source |
| High Country Tools RIPPER-14-DLC | hobby-light | 18000 | 59.5 | 0.0011 | source |
| High Country Tools RIPPER-14-DLC | hobby-rigid | 18000 | 85 | 0.00157 | source |
| High Country Tools RIPPER-14-DLC | business | 18000 | 119 | 0.0022 | source |
| High Country Tools RIPPER-14-DLC | industrial | 18000 | 144.5 | 0.00268 | source |
FAQ
What feeds and speeds for a 1/4" roughing end mill in melamine on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00071 in per tooth and a feed of 25.5 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" roughing end mill in melamine on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0011 in per tooth and a feed of 59.5 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" roughing end mill in melamine on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00157 in per tooth and a feed of 85 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" roughing end mill in melamine on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.0022 in per tooth and a feed of 119 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/4" roughing end mill in melamine on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00268 in per tooth and a feed of 144.5 IPM (1 sourced row). Start low and test in scrap.