Bits › 1/2" upcut end mill › baltic birch plywood
1/2" upcut end mill: baltic birch plywood
Other materials: abs · acrylic · cast acrylic · dense hardwood (maple, oak) · epoxy resin · extruded acrylic · hardwood · hdpe / uhmw · mdf · melamine · polycarbonate (lexan) · softwood
Same material, other bits: all baltic birch plywood settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools END-12U-DLC | hobby-ultralight | 12000 | 49.9 | 0.00104 | source |
| High Country Tools END-12U-DLC | hobby-light | 18000 | 116.4 | 0.00162 | source |
| High Country Tools END-12U-DLC | hobby-rigid | 18000 | 166.3 | 0.00231 | source |
| High Country Tools END-12U-DLC | business | 18000 | 232.8 | 0.00323 | source |
| High Country Tools END-12U-DLC | industrial | 18000 | 282.7 | 0.00393 | source |
FAQ
What feeds and speeds for a 1/2" upcut end mill in baltic birch plywood on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00104 in per tooth and a feed of 49.9 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" upcut end mill in baltic birch plywood on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00162 in per tooth and a feed of 116.4 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" upcut end mill in baltic birch plywood on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00231 in per tooth and a feed of 166.3 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" upcut end mill in baltic birch plywood on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00323 in per tooth and a feed of 232.8 IPM (1 sourced row). Start low and test in scrap.
What feeds and speeds for a 1/2" upcut end mill in baltic birch plywood on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00393 in per tooth and a feed of 282.7 IPM (1 sourced row). Start low and test in scrap.