Bits › 1/2" roundover bit › softwood
1/2" roundover bit: softwood
Other materials: acrylic · baltic birch plywood · dense hardwood (maple, oak) · epoxy resin · hardwood · hdpe / uhmw · mdf · melamine
Same material, other bits: all softwood settings
| Manufacturer / bit | Machine class | RPM | Feed IPM | Chip load (in) | Source |
|---|---|---|---|---|---|
| High Country Tools PRO-14 | hobby-ultralight | 12000 | 49 | 0.00204 | source |
| High Country Tools BOWL-12 | hobby-ultralight | 12000 | 49 | 0.00204 | source |
| High Country Tools PRO-14 | hobby-light | 17000 | 107.9 | 0.00317 | source |
| High Country Tools BOWL-12 | hobby-light | 17000 | 107.9 | 0.00317 | source |
| High Country Tools PRO-14 | hobby-rigid | 17000 | 154.2 | 0.00453 | source |
| High Country Tools BOWL-12 | hobby-rigid | 17000 | 154.2 | 0.00453 | source |
| High Country Tools PRO-14 | business | 17000 | 215.8 | 0.00635 | source |
| High Country Tools BOWL-12 | business | 17000 | 215.8 | 0.00635 | source |
| High Country Tools PRO-14 | industrial | 17000 | 262.1 | 0.00771 | source |
| High Country Tools BOWL-12 | industrial | 17000 | 262.1 | 0.00771 | source |
FAQ
What feeds and speeds for a 1/2" roundover bit in softwood on a hobby-ultralight CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00204 in per tooth and a feed of 49 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/2" roundover bit in softwood on a hobby-light CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00317 in per tooth and a feed of 107.9 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/2" roundover bit in softwood on a hobby-rigid CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00453 in per tooth and a feed of 154.2 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/2" roundover bit in softwood on a business CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00635 in per tooth and a feed of 215.8 IPM (2 sourced rows). Start low and test in scrap.
What feeds and speeds for a 1/2" roundover bit in softwood on a industrial CNC router?
Published manufacturer data (High Country Tools) gives a chip load of 0.00771 in per tooth and a feed of 262.1 IPM (2 sourced rows). Start low and test in scrap.